Synthetic long life, energy conserving fluid to suit screw type compressors where extremely arduous service conditions are encountered.

Synthetic long life, energy conserving fluid to suit reciprocating type compressors where extremely arduous service conditions are encountered.

Is a fully synthetic industrial gear oil using optimised ester molecules which provides excellent film strength and load carrying capacity and is therefore highly recommended in applications subjected to micro pitting such as industrial gear oil (spur, helical, bevel) and wind turbine oils. OEM is a proven improved alternative to PAO based gear oils and wind turbine oils.

Food grade lubricant suitable for many applications including gear lubrication.

High viscosity index and low pour point facilitates low temperature start-up as well as superior lubrication during high temperature operations.

At extreme temperatures, product vaporise s providing clean surfaces which are free from carbonised components.

Food safe product for dissolving and preventing sugar build up from chains, slides, moulds etc.

Suitable for use as lubricating oil in varied applications and leaves a non toxic durable film which lubricates and protects.

AQIS approved.

White mineral oil that has been packaged to comply with the purity standards of British Pharmacopoeia (BP).

For use as a lubricating oil in varied applications and as an ingredient in substances where direct human contact or ingestion occurs.

Containing oxidation and corrosion inhibitors as well as anti-foam and anti-wear additives.

Suitable for hydraulic systems where pumps operate under high pressure and wear out is encountered.

High Viscosity Index (H.V.I.) base oils fortified with shear stable viscosity index improvers, rust, oxidation and foam inhibitors and anti-wear additives.

Retains oil viscosity under high stress, high temperature conditions, and minimising oil pressure loss allowing equipment to operate correctly.

Excellent wear properties to ensure components receive maximum protection under severe conditions.

Zinc free and resists oxidation formation.

46 for all rotary screw compressors and 100 for all reciprocating compressors.

150 for Hydro-Vane type compressors and reciprocating compressors.

High quality oil blended with outstanding anti-wear properties.

Performs over a wide temperature range and protects all moving parts from premature wear.

Designed for use in all types of air tools and pneumatic equipment.

Contains excellent rust protection additives and high film strength properties, providing long life oil that minimises deposits and protects tool components from wear.

Blended using high quality, thermally stable base stocks containing anti-oxidants specially designed for heat transfer applications.

The thermal stability of heat transfer oil is a prime consideration and this product can be used where temperatures exceed 300ºC

Fortified fluid with excellent surface conditioning characteristics making it suitable wherever a clean mould release is required.

Works exceptionally well on concrete and brick foaming.

Available in standard (322) and light (323)

Designed to lubricate working surfaces and manufacturing machinery used under high temperature and pressure conditions.

Specific applications include lathes and milling machines with slides and carriage ways.

Lead free extreme pressure agents, providing high load carrying capacity with good anti-friction characteristics.

Excellent high film strength for superior wear protection and high corrosion protection.

For industrial enclosed gear assemblies and may be also used as bearing oil for highly loaded plain bearings.

A high EP oil enhanced with rust inhibitors for lubrication and protection of pneumatically powered tools such as rock drills, jackhammers and mining equipments.

Very high extreme pressure properties suitable for heavy shock loads typical of rock drill service.

Excellent wear and rust protection designed for corrosive environment in which rock drills operate.

Provides tackiness for good adhesion to drill surfaces even in the presence of moisture.

Translucent synthetic lubricant which forms a bio-stable clear emulsion of high lubricity when diluted with water, has long life, is low foaming and contains a proven biocide to reduce bacterial growth.

Cutting of steel, stainless steel, cast iron, yellow metals and various aluminium grades.

Forms a stable milky emulsion of high lubricity when diluted with water, suitable for a broad range of metal cutting including heavy duty applications.

Displays excellent corrosion inhibition, contains extreme pressure additives and includes a biocide to reduce possible bacteria growth over time.

Neat, extreme pressure mineral cutting oil for heavy duty applications, such as drilling, tapping, broaching and threading of high carbon alloy and stainless steels.

Forms a bio-stable clear emulsion of high lubricity, has long life, is low foaming and contains a proven biocide to reduce bacterial growth.

High performance neat cutting oil developed for honing and super finishing of ferrous and non-ferrous materials. It is also suitable for grinding applications, drilling and general machining of aluminium and yellow metals.

Excellent lubrication and high oxidation stability provide high surface finish and increased product lifetime.

Lithium grease with extreme pressure additives to cater for all automotive chassis applications.

Long life particularly in sealed anti-friction bearings.

High load carrying, extreme pressure, multipurpose food grade grease.

Approved by the Australian Department of Primary Industries and Energy as Food Grade Lubricant Type A.

Contains molybdenum disulphide, corrosion inhibitors and a tackiness agent.

Recommended for C.V. joints and where greasing is infrequent.

For assembly of large earthmoving tyres, brake components and other solvent resistant applications.

Multi-use, long service life, amber, buttery textured grease manufactured from bentone thickened paraffin base oils.

Bearing applications where temperatures are very high since this product does not have a melting point.

Low temperature properties for applications where temperatures are below freezing.

High flash point kerosene based general purpose solvent for parts washing machines and applications requiring a flash point above 65 degrees.

Surfaces and components can be left to air dry or washed off with water.

Low odour, dries with a light residual film.

Deodorised kerosene based solvent for general purpose cleaning of grease on engines, transmission parts and other areas requiring degreasing.

Surfaces and components can be left to air dry or washed off with water.

Low odour and dries with a light residual film.

Cleaning engine, transmission, brake components and electrical parts.

Surfaces and components can be left to air dry.

Low odour and does not leave a residual film.

Multi-functional water displacing fluid with corrosion preventing and lubricating properties.

Contains a volatile solvent which evaporates from the treated components leaving a very thin corrosion protecting oil film.