Advance fully synthetic lubricant for the modern engine.

A wide visosity range ensure optimum performance at start up and at extreme temperatures.

Energy efficient for better fuel economy or increased power.

Premium advance Semi-synthetic 4 stroke multigrade motocycle oil.

Provides exceptional anti-wear protection during cold start-up and also under high speed, high stress, motoring conditions.

Formulated using the highest quality synthetic base oil and ultra high performance additives to deliver optimum performance.

Excellent film strength and lubricity at high RPM.

Reduce friction and heat.

Superior wear, root protection to engine and gears.

Exceptional wet brake performance.

Good detergency for engine cleanliness.

Super high performance ash less 2-stroke for water cooled engines.

Resists plug fouling and the formation of deposits.

Low ash technology to meet the demands of modern 2 cycle motors.

Suitable for lawnmowers, chainsaws and other equipment using small capacity 2 stroke engines.

A synthetic four stroke lubricant for high performance outboard motors in marine environments.

High film strength to provide superior wear protection.

Excellent rust protection suitable for marine engines.

Improved oxidation performance and low temperature properties.

Lead free extreme pressure agents, providing high load carrying capacity with good anti-friction characteristics

Excellent high film strength for superior wear protection and high corrosion protection.

For industrial enclosed gear assemblies and may be also used as bearing oil for highly loaded plain bearings.

A synthetic low ash, low smoke high performance two stroke engine oil for use in non outboard applications.

Provides protection from piston and exhaust port deposits, spark plug fouling and exceptional anti-scuff protection.

Assists in reducing smoke and maintaining engine cleanliness in all air-cooled two stroke engines.

Recommended treat rate is 50:1, however user is advised to consult maker's recommendation.

50:1 100 Mil per 5 Litre of Fuel

33:1 150 Mil per 5 Litre of Fuel

25:1 200 Mil per 5 Litre of Fuel

Tacky extreme pressure and anti-corrosion lubricant with excellent “cling” characteristics that resists throw off, water wash off and corrosion from tree sap.

Protects saw teeth and chains on various equipment from abrasive wear while operating under high speeds.

Is a monograde SAE 30 oil blended specially for use in naturally aspirated petrol and diesel engines.

The blend of base oils and additives in this product promote longer lubrication life and assist in fighting the effects of heat and combustion contamination. Its low as content will assist in preventing deisel injector fouling.

Is a high performance poly-glycol brake fluid which reduces the adsorption of water and therefore minimise brake fade.

Contains oxidation inhibitors for extra life.

All purpose lithium complex grease for automotive and industrial use.

High temperature for wheel bearings and is suited to various applications.

Very high load carrying capacity and resists squeezing out.

Water resistant for boat trailers.

Is recommended for cleaning metals, plastics, wood products, concrete, ceramics and masonry surfaces. Due to the strength of the product, care should be taken to test on an inconspicuous area prior to general cleaning of some surfaces such as plastics.

Multi-functional water displacing fluid with corrosion preventing and lubricating properties.

Contains a volatile solvent which evaporates from the treated components leaving a very thin corrosion protecting oil film.